AHD RRampMeter

Buy AHD RRampMeter Here
AHD RRampMeter Application Notes, Hints

The amazing RRampMeter designed for model railroaders does what no other meter can do!

The amazing RRampMeter designed for Model Railroaders does what no other meter can do!

Easy walk-around measurements of layout voltage drops, accurate booster output setup to optimum voltages for decoders and sound units.

• The only inexpensive device that accurately measures DCC Volts/Amps.
• Also measures AC and DC Volts/Amps.
• Rated at 10 or 20 Amps, costs less than DVMs that cannot measure DCC.
• Measures true RMS Volts/Amps, +/- 2%.
• Suitable for all scales.
• No batteries required for DCC.
• Designed for Left/Right-hand use.
• PCB length 5.63"; Enclosure length 4", width 2", height 1.25"
• 3 Styles Available:
  1. Version I RRampMeter Circuit Module without enclosure (Fig. 2)
  2. Version II RRampMeter with Enclosure and Clip Leads (Fig. 3)
  3. Version III RRampmeter Same as II. with Battery backup for measurements below 7 Volts
  4. Version IV RRampmeterHP
     Same as III but for large Scale high voltage and current applications:
     DCC: 38.6 v and 18-20 Amps
     AC: 27.6 v and 18-20 Amps
     DC: 38.6 v and 18-20 Amps

Fig. 1 - Panel Mount	Fig. 2 - Direct Contact Voltmeter shown without enclosure.
Fig. 3 - Current Meter

• Adjustable contacts permit direct track voltage measurements for all scales.
• Test or Clip Leads (Fig. 3) can also be used for other applications.
• Test Leads or Layout Wiring can be conveniently connected to the rear screw/socket terminals (not shown).
• Designed as a portable troubleshooting tool or as a panel-mount meter (Fig. 1).